¢º Products : LM Guide >THK LM Guide >Cross Roller Bearing > Cam Follower (Types and Features)

 

Type CF

Type CF¡¦-A

This is a standard cam follower with driver groove on the
head patr of the stud. The all stainless steel type
(symbol M)is not subjected to rusting by the surrounding
atmosphere, and as the generation of dust is suppressed,
it is most suitable for clean rooms.

Since there is a hexagon socket on stud head,
installation is easy by using a hexagon rench.
Indicate 'B' at the end of the model number for a hexagon
socket on the stud bolt side on model no. CF12 or above.

Type CFH-A

Type CFN

This can be installed in the same installation holes as the
standard cam follower type, but the stud head is eccentric
by 0.25mm to 1.0mm in regard to the stud installation center,
so the fine adjustment is possible simply by turning the stud
and this is a compact eccentric cam follower with high
accuracy and a single-body construction.
Precision machining is not required for the installation
hole position,etc., so that the work steps for machining
and installation can be reduced widely.

This type has unloaded thrust balls inside the standard
cam followers.
It makes axial direction load possible that comes from
installation error.

Type CFT



  Construction of Cam Followers of Type CF-UU-A

This cam follower type has piping tab holes machined
into the stud head part and the threaded portion of the
standard cam follower.
This cam follower type is most suitable for places requiring
piping for centralized lubrication.